Developed for an optimum air flow and made of real carbon. When the engine is running and temperatures rise, the airbox rubber usually deforms. This is due to the high temperatures as it get's more soft, which leads to an even less optimal air flow. Our carbon intake prevents the airbox from deforming and ensures an optimal air flow.
To use this air intake, you can use the standard filter carrier or a powerflow kit from Twin Air (part number 154221C).
Mounting the intake
1. Take the air filter cover off
2. Take air filter (including filter support) off
3. Loosen hose clamp from airbox rubber
4. Hold the intake in one hand, with the aluminium label facing towards you. Push the intake downwards with pressure towards shock absorber, into the rubber.
5. DON'T FORGET: fasten hose clamp from air box again!
6. Mount air filter. You can use standard filter carrier / support or Twin air filter support 154221C.
7. Place the air filter cover back on.
8. Need to clean your bike? You can mount an airbox cover so it's water resistant.
NOTE: The airbox cover does not fit when the air intake is mounted.
- Real carbon
- Optimum air flow
- Easy to mount
- Prevents airbox rubber from deforming at high temperatures
- Ensures that dirt/mud is evenly spread over whole airbox